Dynagard "E" ™

Dynagard "E" is a revolutionary non-toxic environmentally safe wire rope lubricant that meets the performance levels of petroleum based greases in the area of fluid film and corrosion protection of wire rope strands.

Exceptional for manual application: Dynagard "E" also meets the operational requirements for all Kirkpatrick Wire Rope Lubrication System Models providing optimum coating and penetration prolonging the working life of wire rope while at the same time meeting the environmental concerns of our customers.

Dynagard "E" was the benchmark product used in 2002 to establish MIL-PRF-18458C Type II requirements (U.S.A.) under the "Environmentally Preferable Lubricants" program(NSWCCD, Code632). Documentation is available upon request.

Printer Friendly Version

Note: Printer Friendly version includes the Salt Fog Corrosion Tests, and Rope -DeConstruction images.

  DYNAGARD Salt-Fog Test Competitive Comparison  

  DYNAGARD "E" Performance Test Photos!

Ask for a FREE SAMPLE Jar, so you can do Trial for yourself. Email or Phone 02 49 668020

DYNAGARD E Specifications:

	National Stock Number		9150-01-520-8143
	MIL-PRF-18458C (Type II)		Pass
	•	Meets or Surpasses Requirements.
	LC50 Bio-Aquatic Rating, EPA/600/4-90/027 *		(21,085 ppm)
	•	Test Duration: 48 hr.,
	•	Test Specimen Used: Salt Water Species Mysidopsis Bahia
	Biodegradability Rating (CEC L-33-A-93) **		97%
	Viscosity:		NLGI Grade 2
	Color:		Semi-Clear Brown
	Texture:		Smooth/Creamy
	Flash Point, ASTM D92 (C/F)		316 C / 601 F
	Dropping Point, ASTM D566		Over 400 degrees F
	Oil Separation % (Fed 791, TM 321)		1.37%
	Worked Penetration: mm, (ASTM D217):		301
	Salt Spray, Fed Std 791,TM 4001		Pass
	Accelerated Weathering (Fed 791-4001,ASTM G152,153)		Pass
	Rust test, ASTM D-1743		Pass
	Salt Fog Corrosion Resistance ASTM B117		1,000 hr. / Pass
	Salt Spray, Fed. Standard 791,TM 4001 (10 days)		Pass
	Accelerated Weathering (G23, 10 days)		2 Dots / Pass
	Low Temperature Flexibility (Sec 4.4.4 no cracks @ 6 Degrees C)		Pass (No Cracking)
	Load Wear Index (ASTM D2596)		35.58
	Adhesive % (Sec. 4.6.6. 150 rpm @ 151 +/-2 deg. F):		99.7
	Volatile Matter		1.02% Max.

All standards referred to, are USA Origin unless noted.

* LC50 Testing: Approved test method used to determine the lethal concentration it takes to kill 50% of the test specimens in a given time frame within an aquatic environment. In this case, the estuary shrimp species, Mysidopsis bahia was used. These specimens are 5x more sensitive to contaminants than trout which are the standard for our industry. No specimens died within the test period

** Biodegradability Testing: Method used was the C.E.C. (Co-ordinating European Council) test CEC L-33-A-93. The average for the two control specimens were 39% & 78% respectively. Dynagard "E" proved to have a 97% biodegradability rating.

 

READY TO GIVE THE KIRKPATRICK LUBRICATION SYSTEM A TRIAL?

PHONE STOTTS: 02 49 668020

Email: STOTTS by Clicking here.

Australian Agent:
Stott Industrial Supplies Pty Ltd
Unit 1, 19 Balook Drive Beresfield NSW 2320
Ph 02 49 668020
Fax 02 49 668302